Dell 10-ST2E manual Turning Off Your Computer, After Working Inside Your Computer

Models: 10-ST2E ST2E

1 37
Download 37 pages 14.6 Kb
Page 6
Image 6
Turning Off Your Computer

NOTE: To avoid damaging the system board, you must remove the main battery before you service the computer.

7.Remove the main battery.

8.Turn the computer top-side up.

9.Press the power button to ground the system board.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the display.

CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal components.

10.Remove any installed SmartCards from the slots.

Turning Off Your Computer

CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer.

1.Shut down the operating system:

Windows 8:

*Using a touch-enabled device:

Swipe in from the right edge of the screen, opening the Charms menu and select Settings. Select

the After Working Inside Your Computer and then select Shut down

*Using a mouse:

Point to upper-right corner of the screen and click Settings. Click on the Manual background and then select Shut down.

2.Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your operating system, press and hold the power button for about 4 seconds to turn them off.

After Working Inside Your Computer

After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer.

CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for other Dell computers.

1.Connect any external devices, such as a port replicator, battery slice, or media base, and replace any cards, such as an ExpressCard.

2.Connect any telephone or network cables to your computer.

CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the computer.

3.Replace the battery.

4.Connect your computer and all attached devices to their electrical outlets.

5.Turn on your computer.

6

Page 6
Image 6
Dell 10-ST2E manual Turning Off Your Computer, After Working Inside Your Computer