Manuals / Dell / Computer Equipment / Personal Computer

Dell T5610 owner manual Updating the BIOS

Models: T5610

1 73

Download 73 pages 16.47 Kb

Page 53

Option	Description

	• Enable Intel Virtualization Technology - This option is enabled by default.
VT for Direct I/O	Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional
	hardware capabilities provided by Intel Virtualization technology for direct I/O.
	• Enable Intel Virtualization Technology for Direct I/O - This option is enabled by default.
Trusted Execution	Allows you to specify whether a Measured Virtual Machine Monitor (MVMM) can utilize
	the additional hardware capabilities provided by Intel Trusted Execution Program.
	• Trusted Execution - This option is disabled by default.
Table 11. Maintenance

Option	Description

Service Tag	Displays the service tag of your computer.
Asset Tag	Allows you to create a system asset tag if an asset tag is not already set. This option is not
	set by default.
SERR Messages	Controls the SERR message mechanism. This option is not set by default. Some graphics
	cards require that the SERR message mechanism be disabled.
Table 12. System Logs

Option	Description

BIOS events	Displays the system event log and allows you to clear the log.
	• Clear Log

Updating the BIOS

It is recommended to update your BIOS (system setup), on replacing the system board or if an update is available. For laptops, ensure that your computer battery is fully charged and connected to a power outlet

1.Restart the computer.

2.Go to dell.com/support.

3.If you have your computer's Service Tag or Express Service Code:

NOTE: To locate the Service Tag, click Where is my Service Tag?

NOTE: If you cannot find your Service Tag, click Detect Service Tag. Proceed with the instructions on screen.

4.Enter the Service Tag or Express Service Code and click Submit.

5.If you are unable to locate or find the Service Tag, click the Product Category of your computer.

6.Choose the Product Type from the list.

7.Select your computer model and the Product Support page of your computer appears.

8.Click Drivers & Downloads.

9.On the Drivers and Downloads screen, under the Operating System drop-down list, select BIOS.

10.Identify the latest BIOS file and click Download File.

53

Image 53

Dell T5610 owner manual Updating the BIOS

Contents

Regulatory Model D01T Regulatory Type D01T003 Dell Precision Workstation T5610 Owners ManualNotes, Cautions, and Warnings 1 Working on Your Computer Contents2 Removing and Installing Components 5 Diagnostics 4 System Setup6 Troubleshooting Your Computer 7 Technical SpecificationsBefore Working Inside Your Computer Working on Your ComputerAfter Working Inside Your Computer Turning Off Your ComputerPage Page Recommended Tools Removing and Installing ComponentsSystem Overview Removing the Power Supply Unit PSU1. Follow the procedures in Before Working Inside Your Computer 2. Follow the procedures in After Working Inside Your Computer Installing the Power Supply Unit PSU4. Hold the handle bar to slide the PSU out of the computer 1. Hold the PSU handle and slide the PSU into the computer1. Follow the procedures in Before Working Inside Your Computer Removing the Cover2. Lay down the computer on its side with the latch facing up 3. Lift up the cover-release latch3. Follow the procedures in After Working Inside Your Computer Installing the CoverRemoving the Front Bezel 1. Follow the procedures in Before Working Inside Your Computer4. Follow the procedures in After Working Inside Your Computer Installing the Front BezelRemoving the Optical Drive 1. Follow the procedures in Before Working Inside Your Computer4. Unthread the cables from the latches 7. Lift up the release latch on top of the optical-drive cage 6. Press down on the latch and lift up the cables6. Follow the procedures in After Working Inside Your Computer Installing the Optical DriveRemoving the Hard Drive 1. Follow the procedures in Before Working Inside Your Computer1. Follow the procedures in Before Working On Your Computer Installing the Hard DriveRemoving the Thermal Sensor 6. Follow the procedures in After Working Inside Your Computer4. Follow the procedures in After Working Inside Your Computer Installing the Thermal Sensor1. Follow the procedures in Before Working On Your Computer Removing the Input/Output I/O Panel2. Remove a. cover b. front bezel 3. Remove the screws that secure the USB 3.0 module to the I/O panel7. Follow the procedures in After Working Inside Your Computer Installing the Input/Output I/O PanelRemoving the Air Tunnel Installing the Air TunnelRemoving the Memory 1. Follow the procedures in Before Working On Your ComputerRemoving the Coin-Cell Battery Installing the MemoryInstalling the Coin-Cell Battery 4. Follow the procedures in After Working Inside Your Computer1. Follow the procedures in Before Working Inside Your Computer Removing the Heatsink2. Remove the cover 3. Disconnect the heatsink cable from the system boardRemoving the Heatsink Fan Installing the Heatsink5. Follow the procedures in After Working Inside Your Computer 4. Slide the heatsink fan from the heatsink assembly Installing the Heatsink Fan1. Slide the heatsink fan into heatsink assembly 3. Install a. heatsink b. cover1. Follow the procedures in Before Working Inside Your Computer Removing the ProcessorRemoving the System Fan Installing the Processor6. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your Computer5. Press the latches on either side of the metal plate to release it 4. Remove the screw that secures the metal plate to the system fan8. Slide the latch out to release the air baffle 6. Lift the metal plate out of the chassis7. Remove the screws that secure the drive bay 11. Disconnect the system-fan cables from the system board 9. Remove the air baffle out of the computer10. Remove the PSU cable from the clips CAUTION Using excessive force may damage the grommets 11. Follow the procedures in After Working Inside Your Computer Installing the System FanRemoving the PSU Card 1. Follow the procedures in Before Working On Your Computer4. Remove the baffle cover from the computer 5. Disconnect the power cables from the system board3. Slide the baffle cover from its slot towards the front Removing the Speaker Installing the PSU Card6. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working On Your Computer2. Connect the speaker cable to the system board 3. Install the cover Installing the Speaker4. Follow the procedures in After Working Inside Your Computer 3. Disconnect the speaker cable from the system board1. Follow the procedures in Before Working Inside Your Computer Removing the System Board2. Remove a. cover b. coin-cell battery c. PCI card d. memory modules e. thermal sensor f. air tunnel if available g. heatsink fan5. Remove the screws that secure the system board 4. Disconnect the cables connected to the system board6. Slide the system board towards the system-fan assembly Installing the System Board7. Lift the system board away from the chassis 2. Tighten the screws to secure the system board to the chassis4. Install a. processor b. memory modules c. coin-cell battery System Board Componentsm. thermal sensor n. cover o. power supply unit PSU 5. Follow the procedures in After Working Inside Your Computer11. processor socket 13. front-panel audio connector 7. USB 3.0 front-panel connector15. hard-drive HDD1 fan connector 17. DIMM slots 19. DIMM connectors 21. PSWD jumper 23. system fan 3 connectorPage Memory Module Guidelines Power Supply Unit PSU LockAdditional Information Page Navigation Keys System SetupBoot Sequence System Setup Options Table 3. System Configuration NOTE If the hard drives are connected to a RAID controller card Table 5. Security Table 4. VideoTable 7. Performance Table 6. Secure BootDefault Setting Enable Dell Reliable Memory Default Setting Enable Hardware PrefetchTable 10. Virtualization Support Table 9. POST BehaviorUpdating the BIOS Assigning a System Password and Setup Password System and Setup PasswordDisabling a System Password Deleting or Changing an Existing System and/or Setup Password1. Follow the procedures in Before Working Inside Your Computer 11. Follow the procedures in After Working Inside Your ComputerPage Enhanced Pre-Boot System Assessment ePSA Diagnostics DiagnosticsPage Diagnostic LEDs Troubleshooting Your ComputerA possible graphics card failure has occurred Errors That Halt Your Computer Completely Error MessagesErrors That Soft Halt Your Computer Errors That Do Not Halt Your ComputerTable 15. Errors that do not halt your computer Table 16. - Errors that soft halt your computerDell Reliable Memory Technology RMT has discovered and isolated errors in system memory. You may continue to work. Memory module replacement is recommended. Please refer to the RMT Event log screen in BIOS setup for specific DIMM information Page Table 17. Processor Technical SpecificationsTable 18. System Information Table 19. MemoryTable 21. Audio Table 20. VideoTable 22. Network Table 23. Expansion Interfacessupports one 5.25-inches SATA device or supports one Table 25. External ConnectorsTable 24. Drives two 164-pin connectors four when optional second processor is Table 26. Internal ConnectorsTable 27. Controls and Lights solid amber light - the computer does not start, indicating a problemblinking amber light - indicates a problem has occurred with the Table 28. Power amber/blinking light - see the service manual for specific diagnostic4015.3 BTU/Hr at 100 VAC 4365.5 BTU/Hr at 107 VAC105 G +/- 5% with pulse duration of 2 msec +/- 10% equivalent to Table 30. Environmental40 G +/- 5% with pulse duration of 2 msec +/- 10% equivalent to Page 1. Visit dell.com/support Contacting Dell