Dell X87001253BLK, XPS 8700 manual Replacing the mSATA Drive

Replacing the mSATA Drive

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

Procedure

1Align the notch on the mSATA drive with the tab on the system-board connector.

2Insert the mSATA drive at a 45-degree angle into the system-board connector.

3Press the other end of the mSATA drive down and replace the screws that secure the mSATA drive to the systemboard.

Postrequisites

Replace the computer cover. See "Replacing the Computer Cover" on page 16.

34 Replacing the mSATA Drive