Replacing the Power Button Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Procedure
1Align and push the power button module tabs into the slots on the top panel.
2Connect the power button module cable from the system board connector F_PANEL. See
Postrequisites
1Replace the top cover. See "Replacing the Top Cover" on page 48.
2Replace the front bezel. See "Replacing the Front Bezel" on page 23.
3Replace the computer cover. See "Replacing the Computer Cover" on page 16.
Replacing the Power Button Module | 59 |
