Dell XPS 13 owner manual Removing the Solid-State Drive

8

Solid-State Drive

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is On or in Sleep state.

CAUTION: Solid-state drives are extremely fragile. Exercise care when handling the solid-state drive.

Prerequisites

1Remove the base cover. See "Removing the Base Cover" on page 13.

2Remove the power-light board. See "Removing the Power-Light Board" on page 15.

3Remove the battery. See "Removing the Battery" on page 17.

Removing the Solid-State Drive

1Peel the tape that is adhered over the solid-state drive.

1

1 tape

2Remove the screw that secures the solid-state drive to the system board.

Solid-State Drive

27