8Gently lift the palm-rest assembly to a 90-degree angle and then release the palm-rest assembly off the display assembly.

1

2

3

1

palm-rest assembly

2

screws (4)

3

display hinges (2)

 

 

Replacing the Display Assembly

1Slide and place the palm-rest assembly over the display assembly.

2Press down on the display hinges and ensure that the screw holes on the display hinges align with the screw holes on the palm-rest assembly.

3Replace the screws that secure the display assembly to the palm-rest assembly.

4Route the mini-card cables through the routing guides.

5Slide the touchpad cable into the system-board connector and press down on the connector latch to secure the keyboard cable.

56

Display Assembly

Page 56
Image 56
Dell XPS 13 owner manual Replacing the Display Assembly