Dell XPS 400 owner manual System Setup, Overview, 113, 50.8 cm/sec, 508 cm/sec

Environmental

Temperature:

Operating	10° to 35°C (50° to 95°F)
Storage	–40° to 65°C (–40° to 149°F)
Relative humidity	20% to 80% (noncondensing)
Maximum vibration:
Operating	0.25 G at 3 to 200 Hz at 0.5 octave/min
Storage	0.5 G at 3 to 200 Hz at 1 octave/min
Maximum shock:
Operating	bottom half-sine pulse with a change in velocity of 20 inches/sec
	(50.8 cm/sec)
Storage	27-G faired square wave with a velocity change of 200 inches/sec
	(508 cm/sec)
Altitude:
Operating	–15.2 to 3048 m (–50 to 10,000 ft)
Storage	–15.2 to 10,668 m (–50 to 35,000 ft)

System Setup

Overview

Use system setup as follows:

•To change the system configuration information after you add, change, or remove any hardware in your computer

•To set or change a user-selectable option such as the user password

•To read the current amount of memory or set the type of hard drive installed

Before you use system setup, it is recommended that you write down the system setup screen information for future reference.

NOTICE: Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work incorrectly.

Appendix

113