release tab card retention mechanism*

card retention door

*"piano" bracket

*may not be present on all computers

4If your computer includes a card retention mechanism:

a Pivot the mechanism upward and gently squeeze in on the sides to release the mechanism from the two tab slots holding it in place.

b Set the retention mechanism aside in a secure location.

NOTE: For full-length PCI-E cards, if a "piano" bracket is present on your computer you need to rotate it upward by pressing the tabs on the side of the bracket toward each other.

5If you are installing a new card, remove the filler bracket to create a card-slot opening. Then continue with step 7.

6If you are replacing a card that is already installed in the computer, remove the existing card.

If necessary, disconnect any cables connected to the card. If your card includes a retention mechanism, remove the top of the retention mechanism by pressing the tab and pulling up on the top.

NOTE: For full-length PCI-E cards, if a "piano" bracket is present on your computer you need to rotate it upward by pressing the tabs on the side of the bracket toward each other.

Removing and Installing Parts

83

Page 83
Image 83
Dell XPS 400 owner manual Removing and Installing Parts