Installing a Media Card Reader

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer chassis.

1Follow the procedures in "Before You Begin" on page 63.

Media Card

Reader

screws (4)

2Lay the computer on its side so that the system board is on the bottom of the inside of the computer.

3Remove the computer cover (see page 68).

4Remove the drive panel (see page 89).

5Remove the Media Card Reader from its packaging and ensure that all four screws are included..

6Gently slide the drive into place until you feel a click or feel the drive securely installed. Ensure that the Media Card Reader is installed before the FlexBay cable is connected.

Removing and Installing Parts

101

Page 101
Image 101
Dell XPS 400 owner manual Installing a Media Card Reader, 101, Media Card Reader Screws