![AUTOMATIC OVEN](/images/new-backgrounds/57492/5749249x1.webp)
AUTOMATIC OVEN
COOKING
To cook food automatically in the oven, it is necessary to:
1.Set the length of the cooking time 2.Set the end of the cooking time 3.Set the temperature and the oven
cooking program.
These operations are done in the following way:
1.Set the length of the cooking time by
pushing the button and the
button to advance, or to go back if you have passed the desired time (fig. 16). The AUTO and the
symbol will be on.
2.Set the end of the cooking time by
pressing the button (the cooking time already added to the clock time
will appear), and the button (fig. 26); if you pass the desired time you may get back by pushing the
button.
After this setting, the symbol will go off. If after this setting, the AUTO flash on the panel and a buzzer gives off, it means there was an error in the programming.
In this case, modify the end of cooking time or the cooking time itself by following again the above mentioned instructions.
3.Set the temperature and the cooking program by using the switch and thermostat knobs of the oven (see specific chapters).
Now the oven is programmed and everything will work automatically, that is the oven will turn on at the right moment to end the cooking at the established hour.
During cooking, the symbol remains on.
By pushing the button you can see the time that remains until the end of cooking.
The cooking program may be cancelled
in any moment by pushing .
At the end of the cooking time the oven will turn off automatically, the symbol will turn off, AUTO will flash and a buzzer will sound, which can be turned off by pushing any of the bot- tons.
Turn the switch and thermostat knobs to zero and put the programmer onto
“manual” by pressing the button.
Attention: A power cut makes the clock go to zero and cancels the set programs.
After a power cut, three zeros will flash on the panel.
Figure 16
A |
U |
T |
O |
Figure 17
A |
U |
T |
O |
25 |