DeLonghi D 61 E manual Installation, Electrical Requirements

Models: D 61 E

1 36
Download 36 pages 36.45 Kb
Page 5
Image 5
INSTALLATION

INSTALLATION

CAUTION:

This appliance must be installed in accordance with these installation instructions.

This appliance shall only be serviced by authorized personnel.

This appliance is to be installed only by an authorised person.

Incorrect installation, for which the manufacturer accepts no responsibility, may cause personal injury of damage.

Always disconnect the cooker from mains power supply before carrying out any maintenance operations or repairs.

ELECTRICAL REQUIREMENTS

The appliance must be connected to the mains checking that the voltage corresponds to the value given in the rating plate and that the electrical cable sections can withstand the load specified on the plate.

The appliance must be connected directly to the mains placing an two pole switch with minimum opening between the contacts of 3 mm between the appliance and the mains.

The power supply cable must not touch the hot parts and must be positioned so that it does not exceed 75°C at any point.

Once the appliance has been installed, the switch or socket must always be accessible.

If the power supply cable is damaged it must be substituted by a suitable cable available according to current electrical regulations.

N.B. The connection of the appliance to earth is mandatory.

If the installation requires alterations to the domestic electrical system call a qualified electrician. He should also check that the socket cable section is suitable for the power drawn by the appliance.

Replacing the power cord must be done by a qualified electrician in accordance with the instructions supplied by the manufacturer and in compliance with established electrical regulations.

5

Page 5
Image 5
DeLonghi D 61 E manual Installation, Electrical Requirements