IMPORTANT
–The appliance should be installed by a registered electrician in compliance with the current electrical regulations and in observation of the instructions supplied by the manufacturer.
Failure to comply with this condition will render the guarantee invalid.
–Always disconnect the cooker from mains power supply before carrying out any maintenance operations or repairs.
LOCATION
The cooker has type “Y” overheating protection so that it can be installed in a cabinet. The cooker must be installed no less than 50 mm away from any side wall which exceed the height of the cooktop;
The appliance must be housed in heat resistant units.
The walls of the units must be capable of resisting temperatures of 75 °C above room temperature.
Do not install the appliance near inflammable materials (eg. curtains).
Figure 1
650 mm
450 mm
6
