CONNECTING OF THE POWER SUPPLY CABLE
•Unhook the terminal board cover by inserting a screwdriver into the two hooks A (fig. 5.1).
•Open the cable gland by unscrewing screw F (fig. 5.3), unscrew the terminal screws and remove the cable.
•The new supply cable, of suitable type and section, is connected to the terminal board following the diagram of fig. 5.2.
FEEDER CABLE SECTION “Type H05RR-F”
3600 W MAX (15.6 A) |
WARNING: If the power supply cable is damaged, it must be replaced only by an authorised service agent in order to avoid a hazard.
A |
Fig. 5.1 |
230-240 V 
E 
Earth
N Neutral
L Live
LN
E
Fig. 5.2
F
Fig. 5.3
22
