PROGRAM FOR AUTOMATIC SWITCHING OFF OF ONE COOKING ZONE
This function permits to set a timer from
1to 99 minutes for automatic turning OFF of one cooking zone only.
Note: It is not possible to set this pro- gram for both the cooking zones.
With the touch control switched ON:
– Press the timer keys |
|
|
| or ; a beep |
sounds and the timer display shows
“ 00 ”. The displays of the cooking zones show " " (timer).
–Within 10 seconds, select the cooking zone to be programmed by using the
cooking zone keys | or ; a beep |
sounds and the led next to the heater display start blinking.
– Set the disired power level by using the cooking zone keys or ; the led next to the heater display is stably lit (not blinking).
– Within 10 seconds, set the timer
by using the timer keys or to increase or reduce the value (when touching the keys, the led next to the heater display is blinking). If the select- ed time is “ 00 ”, the timer is switched off automatically after 10 seconds.
–The countdown starts 10 seconds after the last selection. The time can be changed at any time by using the timer keys; the countdown stops and then the timer changes the stop time.
Now the program for automatic switch- ing off is complete.
At the end of the countdown the cook- ing zone will switch off automatically, an acoustic signal (beep) will sound (for one minute only), “ 00 ” will flash on the timer display and the led next to the heater display will blink.
Press any button of the touch control to reset the timer.
Note: The program for automatic switch off can be cancelled at any time by resetting the timer to “ 00 ”).
OR
OR |
OR
13