DeLonghi ESAM04.350 Espresso ml, Customising the my coffee quantity, Adjusting the coffee mill

Corresponding coffee	espresso (ml)
MY COFFEE	program.
	from ≃20 to ≃180
SHORT	≃40
STANDARD	≃60
LONG	≃90
EXTRA LONG	≃120

Customising the “my coffee” quantity

The appliance is set by default to automatically deliver 30 ml of “MY COFFEE”. To modify these settings, proceed as follows:

1.Place a cup under the coffee spouts ( fig. 9).

2.Press the (button repeatedly (fig. 8) until “MY COFFEE” is displayed.

3.Keep the button (fig. 2) pressed until the message “Program Quantity” is displayed. Release the button. The machine starts making the coffee;

4.As soon as the coffee in the cup reaches the required level,

press the button again.

The quantity set has now been programmed.

Adjusting the coffee mill

The coffee mill is set by default to prepare coffee correctly and should not require regulating initially.

However, if after making the first few coffees you find that delivery is either too fast or too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment knob (fig. 10).

Please note!

The grinding adjustment knob must only be turned when the coffee mill is in operation.

For faster delivery (not a drop at a time), turn one click clockwise towards “7” (coarser ground coffee).

For fuller bodied creamier coffee,

turn one click anticlockwise towards

“1” (finer ground coffee).

These adjustments will only be

evident after at least 2 cups of coffee have been delivered.

If delivery is still too fast or too slow, repeat the correction, turning the knob another click.

Tips for a hotter coffee

For a hotter coffee, you are recommended to:

•before delivering the coffee, perform a rinsing cycle by

pressing the button to select the “Rinsing” function.

Hot water is delivered from the spout, heating the internal circuits of the appliance and thus raising the coffee temperature.

•place the cups on the cup warmer until they are warm.

•warm the cups by rinsing them with hot water (using the hot water function).

•set the “high” coffee temperature (••••) in the menu.

Making coffee using coffee beans

Important!

Do not use caramelised or candied coffee beans as they could stick to the coffee mill and make it unusable.

1.Fill the container with coffee beans (fig. 11).

2.Place under the coffee spouts:

-1 cup, if you want to make 1 coffee (fig. 9);

-2 cups, if you want 2 coffees (fig. 12);

3.Lower the spouts as near as possible to the cup. This makes a creamier coffee (fig. 13).

4.Press the button corresponding to the number of coffees

required (1 cup or 2 cups ) (fig. 2 and 14).

5.Preparation begins. The quantity of coffee is displayed together with a progress bar which gradually fills as

preparation progresses.

Once the coffee has been made, the appliance prepares for use again.

Please note:

•While the machine is making coffee, delivery can be interrupted at any moment by pressing one of the coffee

buttons ( or ).

•At the end of delivery, to increase the quantity of coffee in the cup, just press (within 3 seconds) one of the coffee

buttons (or ).

Once the coffee has been made, the appliance is ready to use again.

Important!

If the coffee is delivered a drop at a time, too fast and not creamy enough or too cold, read the tips in the “Troubleshooting” section on page 19.

Various alarm messages could be displayed while using the machine. Their meaning is explained in the section “Displayed messages” (page 18).

Making coffee using pre-ground coffee

Important!

•Never add pre-ground coffee when the machine is off or it could spread through the inside of the machine and dirty

12