![SETTING WATER HARDNESS](/images/new-backgrounds/57567/5756737x1.webp)
10.Press the OK button to start rinsing. Hot water flows out of the spout and the message “Rinsing Please wait” is displayed.
11.When the water tank is completely empty, the message
“Rinsing complete Press OK” is displayed.
12.Press the OK button. The appliance goes off automatically.
To turn the appliance on again, press the button.
SETTING WATER HARDNESS
The DESCALE message is displayed after a period of time established according to water hardness.
The machine is set by default for a hardness value of 4.
The machine can also be programmed according to the actual hardness of the mains water in the various regions, varying the frequency with which the message is displayed.
Measuring water hardness
1.Remove the “TOTAL HARDNESS TEST” (A24) indicator paper from its pack.
2.Immerse the paper completely in a glass of water for one second.
3.After about a minute, 1, 2, 3, or 4 red squares form, depending on the hardness of the water. Each square corresponds to one level.
Level 1
•mmm
Level 2
••mm
Level 3
•••m
Level 4
••••
Set water hardness
1.Press the MENU button to enter the settings menu.
2.Press the or
button and select “Water hardness”.
3.Confirm the selection by pressing theOK button.
4.Press or
to set the water hardness identified using the indicator paper (see figure in the previous section).
5.Press the OK button to confirm the setting.
6.Press the ESC button to exit the menu.
The machine is now reprogrammed with the new water hardness setting.
TECHNICAL SPECIFICATION
Voltage: | ||
Absorbed power: |
| 1350W |
Pressure: |
| 15 bar |
Water tank capacity: |
| 1,8 L |
Size: LxHxD: |
| 282x364x425 mm |
Cable length: |
| 1,5 m |
Weight: |
| 11 Kg |
Max. beans container capacity: | 200 g |
The appliance complies with the following EC directives:
•
•Low Voltage Directive 2006/95/EC and subsequent amendments;
•EMC Directive 2004/108/EC and subsequent amendments
•Materials and accessories coming into contact with food conform to the provisions of EC regulation 1935/2004.
disposal
Important information for correct disposal of the product in accordance with EC Directive 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources.
As a reminder of the need to dispose of household appliances separately, the product is marked with a rubbish bin bearing a cross.
17