PUSH symbol fully in until it clicks into place.
Please note!
If the infuser is difficult to insert, you must first adapt it to the right dimensions by pressing it forcefully from the bottom and top as shown in the figure.
8.Once inserted, make sure the two red buttons have snapped out.
9.Replace the drip tray and waste coffee
container.
10. Close the service door.
Cleaning the milk container
Clean the milk container each time you prepare milk as described below:
1.Remove the lid of the milk container.
2.Remove the milk spout and intake tube.
3. Wash | all | the |
c o m p o n e n t s | ||
thoroughly | with | |
hot water | and mild | |
liquid. | ||
All components are | ||
dishwasher | safe, | |
placing them in the | ||
top basket | of the | |
dishwasher. |
| |
4. Make sure there are no milk residues left inside the holes.
5.Check that the intake
tube and spout are not clogged with milk residues.
6.Replace the milk spout and intake tube.
7.Replace the milk container lid.
Cleaning the hot water/steam nozzle
Each time you prepare milk, clean the nozzle with a sponge to remove milk residues from the gaskets (fig. 24).
DESCALING
Descale the machine when the message “DESCALE” flashes on the display.
Important!
Descaler contains acids which may irritate the skin and eyes. It is vital to respect the manufacturer’s safety warnings given on the descaler pack and the warnings relating to the procedure to follow in the event of contact with the skin and eyes.
Please note!
Use De’Longhi descaler only. Under no circumstances should you use sulphamic or acetic based descalers. Their use invalidates the guarantee.
Failure to descale the appliance as described above also invalidates the guarantee.
1.Turn the machine on.
2.Press the MENU button to enter the settings menu. Press the 
or 
button until “Descale” is displayed;
3.Press the OK button to confirm: The message“Add descaler
Press OK” is displayed.
4.Before confirming empty the water tank (A10) completely. Pour the descaler (A23) diluted with water (respecting the proportions indicated on the descaler pack) into the water tank and replace the tank in the appliance.
Important! Danger of burns
Hot water containing acid flows out of the hot water spout. Avoid contact with splashes of water.
5.Place an empty container with a minimum capacity of 1.5 litres under the hot water spout.
6. Confirm with the OK button.
7.After confirming by pressing OK, the message “Descale underway” is displayed. The descale programme starts
and the descaler liquid comes out of the water spout. The descale programme automatically performs a series of rinses and pauses to remove limescale deposits from inside the machine.
After about 30 minutes, the message “Rinsing FILL TANK” is displayed.
8.The appliance is now ready for rinsing through with clean water. Remove the water tank, empty, rinse under running water, fill with clean water and replace. “Rinsing
Press OK” is displayed.
9.Empty the container used to collect the descaler solution and replace it under the cappuccino maker.
16
