
Selecting the quantity of coffee in the cup Select the required quantity of coffee by turning the knob.
Turning it clockwise increases the amount of cof- fee obtained.
The first time you use the appliance, you will need to make a number of coffees to identify the correct knob position through trial and error.
Adjusting the coffee mill
The coffee mill is set by default to prepare cof- fee correctly and should not require regulating initially.
However, if after making the first few coffees you find that the coffee is either too weak and not creamy enough or delivery is too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment knob (fig. 7).
Please note:
The grinding adjustment knob must only be tur- ned when the coffee mill is in operation.
If the coffee is delivered too slowly or not at all, turn one click clockwise towards “7”. For fuller bodied creamier coffee, turn one click anti- clockwise towards “1” (do not turn more than one click at a time otherwise the cof- fee could be delivered a drop at a time).
These adjustments will only be evident after at least 2 cups of coffee have been made.
If this adjustment does not obtain the desired result, turn the knob another click.
Tips for a hotter coffee:
For hotter coffee, you should:
•before delivering the coffee, perform a rinse
cycle by pressing the button. Hot water is delivered from the spout, heating the inter-
nal circuits of the appliance and thus raising the coffee temperature.
•warm the cups by rinsing them with hot wa- ter (using the hot water function).
Making coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans as they could stick to the coffee mill and make it unusable.
1.Fill the container with coffee beans (fig. 8).
2.Place under the coffee spouts:
-1 cup, if you want 1 coffee (fig. 9);
-2 cups, if you want 2 coffees.
3.Lower the spouts as near as possible to the cup. This makes a creamier coffee (fig. 10).
4.Press the button corresponding to the num-
ber of coffees required (1 cup or 2 cups
, fig. 11 and 12).
5.Preparation begins and the and
lights flash.
Please note:
•While the machine is making coffee, delivery can be interrupted at any moment by pres- sing one of the two coffee buttons (or
).
•At the end of delivery, to increase the quan- tity of coffee in the cup, just press (within 3 seconds) one of the coffee buttons ( or
).
Once the coffee has been made, the appliance is ready to use again.
Please note:
For hotter coffee, see the section “Tips for a hot- ter coffee”.
Important!
If the coffee is delivered a drop at a time, too weak and not creamy enough or too cold, read the tips in the “Troubleshooting” section on page 19.
Making coffee using pre-ground coffee
Important!
•Never add
11