OPERATION AND USE 1) SETTING THE CLOCK
For the first time, set the clock to the correct time, proceeding as follows:
•Press the button “h” until the display shows the correct hour setting.
•Press the button “min” until the display shows the correct minute setting. When setting the clock time, the numbers will flash on the display.
The flashing numbers will continue for a few seconds until the adjustment has finished. Once the numbers stop flashing the clock will start working.
To change the time, press and hold the “h” or “min” button for at least 5 seconds or until the numbers are flashing. Then proceed as above to modify both hours and minu- tes.
|
|
|
|
|
|
correct time |
|
|
|
| Set temperature |
|
|
|
| ||
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
2) MANUAL OPERATION
To operate the appliance in “manual” mode, press the “ON MODE” button.
To set the required power level: press the “ON MODE" button, and then press again one or more times within 5 seconds to select the power level, as per the following sequence:
Maximum power
Medium power
Minimum power
Off
If Maximum power has been selected, adjust the “ +” or ”
Press and hold the button to move through the temperature mode quickly.
correct time |
|
|
| set temperature |
|
|
4