DeLonghi 10.13 Menu Settings, Rinsing, Descale, Install filter, Replacing the filter, Adjust time

•release the main switch at the side of the appliance (fig. 2).

Important!

Never press the main switch while the appliance is on.

MENU SETTINGS

When you access the programming menu by pressing the MENU/ESC button, the following menu items are available:

Rinsing

Use this function to deliver hot water from the spout to heat the internal circuit and make the coffee delivered hotter.

To enable the function, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the HOT MILK or LATTE button (fig. 8) until “Rins- ing” is displayed;

3.	Press the	button. The message “Confirm?” is dis-
	played;
4.	Press the	(fig. 3): after a few seconds, hot water
	flows out of the spout, heating the internal circuit and ma-
	king the coffee delivered hotter.

Please note!

Press any button to stop hot water delivery at any time.

Descale

For instructions on descaling, see page 17.

Install filter

For instructions on how to install the filter, see the section “Installing the filter (page 18).

Replacing the filter

For instructions on how to replace the filter, see the section “Replacing the filter” (page 19).

Adjust time

To adjust the time on the display, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the HOT MILK or LATTE button (fig. 8) until “Adjust time” is displayed;

3. Press the button (fig. 3);

4.Press the HOT MILK or LATTE button (fig. 8) to change the hours;

5.Press the button to confirm;

6.Press the HOT MILK or LATTE button (fig. 8) to change the minutes;

7.Press the button to confirm.

This sets the time. Press the MENU/ESC button to exit the menu.

Auto-start

You can set the auto-start time in order to have the appliance ready at a certain time (for example in the morning) so you can make coffee immediately.

Please note!

To enable this function, the time must already have been set correctly.

To enable Auto-on, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the HOT MILK or LATTE button (fig. 8) until “Au- to-start” is displayed;

3.Press the button. “Enable?” is displayed;

4.	Press the	button to confirm;
5.	Press the HOT MILK or LATTE button to choose the hours;
6.	Press the	button to confirm;

7.Press the HOT MILK or LATTE button (fig. 8) to change the minutes;

8.	Press the	button to confirm;
9.	Press the MENU/ESC button to exit the menu.

Once the time has been confirmed, enabling of auto-start is in-

dicated by the		symbol displayed alongside the time and
under the Auto-start item in the menu.
To disable the function:
1.	Select auto-start from the menu;
2.	Press the	button. “Disable?” is displayed;
3.	Press the	button to confirm.
The	symbol is no longer displayed.

Auto-Off

The time can be changed so that the appliance switches off after 15 or 30 minutes, or after 1, 2 or 3 hours.

To re-programme Auto-off, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the HOT MILK or LATTE button (fig. 8) until “Au- to-off” is displayed;

3.Press the button;

4.Press the HOT MILK or LATTE button (fig. 8) until the de- sired operation time is displayed (15 or 30 minutes, or 1, 2 or 3 hours);

5. Press the button to confirm;

6.Press the MENU/ESC button to exit the menu. Auto-off is programmed.

Cup warmer

This function enables or disables the cup warmer. Proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the HOT MILK or LATTE button (fig. 8) until “Cup warmer” appears on the display;

10