Use gb
Traditional Cooking Function
The setting speeds are 1,2 and 3, as per graphics. The others are inhibited.
This feature allows you to cook in the traditional manner by modulating the power and mixing evenly, in addition the th- ree exclusive “WARM”, “MILK” and “CREAM” functions enable to heat food and milk and prepare creams.
Depending on the kind of food to be cooked, apply the multi- function blade (M) (for mincing and blending food) or the mi- xing paddle (N) (for mixing).
•After having put the food one wishes to cook in the contai- ner (G), position it in its place properly on the base of the appliance (H), then put on the lid (C) and close it by turning it clockwise until it clicks into place (fig. 1).
•Press the I/0 main switch (I) (fig. 2).
Manual cooking
•Press the cooking button (2) (fig. 3) once.
By default the display shows “0:00“ and the power 
.
If one wishes to select a different power, press the “MODE”(7)
(fig. 3) button until the desired function is selected.
•If one wishes to set the cooking time press the “+ and
•Press the “START/STOP” (8) button to start cooking (fig. 4).
The countdown time starts on the display.
•Place the speed selection knob (9) on the slow mixing posi- tion
One can adjust the power at any time by pressing the “MODE” button. In the event of long cooking, the paddle will start mixing intermittently after 15 minutes.
The end of cooking is signalled via the 
message on the display and by an acoustic signal.
To remove the container (G) at the end of each function switch off the appliance via the appropriate button and remove the lid (C).
Be careful not to get burnt when opening the lid and/or removing the container!!
This appliance is not suitable for frying; thus do not use amounts of oil in excess of 50 g.
In the event there is no water or it runs out, the applian- ce stops working and emits an acoustic signal. The display
shows 
and the red 
warning light switches on.
Pre-set cooking
•Press the cooking button (2) once.
Press the “MODE” (7) button until the desired function is displayed: “WARM”, “MILK “ or “CREAM” (fig.
“WARM” function
This function is for heating food at a constant temperature of approximately 37°C.
It is recommended to apply the mixing paddle (N).
Press the start/stop (8) button to start heating; the paddle will start mixing. When the appliance reaches the temperature it emits an acoustic signal and maintains the reached tempera- ture for a maximum of 30 minutes.
When 30 minutes have elapsed, 
will appear on the display.
With this function the knob (9) and the + and - button are disabled.
To remove the container (G) at the end of each function switch off the appliance via the appropriate button and remove the lid (C).
Be careful not to get burnt when opening the lid and/or removing the container!!
Before administering heated food to a baby, always check that it is not too hot (above 37°C).
In the event there is no water or it runs out, the ap- pliance stops working and emits an acoustic signal. The
display shows 
and the 
red warning light switches on.
“MILK” function
This function is for heating milk at a constant temperature of approximately 80°C.
It is recommended to apply the mixing paddle (N).
Press the start/stop (8) button to start heating; the paddle will start mixing.
When the appliance reaches the temperature it emits an acoustic signal and maintains the reached temperature for a maximum of 30 minutes. When 30 minutes have elapsed,
will appear on the display.
With this function the knob (9) and the + and - button are disabled.
To remove the container (G) at the end of each function switch off the appliance via the appropriate button and remove the lid (C).
15
