Using the remote control
INSERTING OR REPLACING THE BATTERIES
• Remove the cover on the rear of the remote control.
• Insert two “AAA” 1.5V batteries, making sure they are in the cor- rect position (see the instructions inside the battery compart- ment).
• Replace the cover.
✔ If the remote control unit is replaced or discarded, the batteries must be removed and disposed of in accordance with current legislation as they are harmful to the environment.
✔Warning: do not mix old and new batteries. Do not mix alkaline, standard
If the remote control is not be used for a certain length of time, remove the batteries.
SETTING THE TIME
After having inserted the batteries, the clock on the display flashes until the time is set.
Proceed as follows:
•Press the 
or 
button until the correct time is reached. Hold the button down to run rapidly through first the minutes, then the tens of minutes and then the hours.
•Once the correct time has been reached, release the button and press the OK button to confirm.
•To cancel the settings programmed on the remote control and restore the original settings, press the reset button lightly with the point of a pencil or pen.
USING THE REMOTE CONTROL
The first set of buttons on the remote control are the same as those on the control panel of the appliance. You should therefore refer to the instruc- tions in the chapter Operating from the control panel to turn the appliance on, select the
operating mode (AIR CONDITIONING, DEHUMIDIFYING, FAN, HEA- TING or SMART) and the fan speed.
The following section describes the ADDITIONAL FUNCTIONS corre- sponding to the controls on the bottom part of the remote control.
BOOST FUNCTION
Ideal for the summer to cool rooms rapidly. To set this mode:
• Press the 
button.
The appliance operates in air conditioning mode at maximum fan speed. While this function is selected, it is not possible to set the tem- perature or change fan speed.
Note:- BOOST function cannot be set during HEATING mode
11
