Using the remote control
SLEEP FUNCTION
This function is useful for the night as it gradually reduces operation of the appliance and turns it off after 8 hours.
To set this function correctly:
• Select the operating mode (air conditioning, dehumidifying, smart or heating (certain models only) as described above.
•Press the 
button. The appliance operates in the previously selected mode with the lowest possible fan speed.
The SLEEP function maintains the room at optimum temperature without excessive fluctuations in either temperature or humidity and with silent operation.
Fan speed, room temperature and humidity vary gradually to ensure the most comfortable conditions.
During air conditioning, the temperature increases by 2°F (1°C) after 60 minutes and a further 2°F (1°C) after 2 hours.
In dehumidifying mode, the dehumidifying power of the appliance is partially reduced every hour for the first two hours.
In heating mode, the temperature drops by 2°F (1°C) every hour, for 3 hours. Ventilation will be in AUTO mode.
SELECTING THE TEMPERATURE SCALE
Press the | button to switch the temperature scale from Centigrade |
to Fahrenheit and
PROGRAMMING THE TIMER
The appliance can be programmed to start up and shut down when desired.
Programming start up
• Press the 
button.
The 
) flashes on the remote control display.
• Press the 
or buttons to set the time you want the appliance to start up.
• When that time is reached, press the OK button to confirm. The mes-
sage ( 
) appears on the remote control display and the 
sym- bol is displayed on the appliance to indicate that the timer is active.
12
