2.Place the motor cover (A) in the opening of the Unisaw (Fig. 31). Place the rear motor cover clips inside the motor opening and push the front of the motor cover until all 4 motor cover clips are engaged with the motor cover opening in the Unisaw.
NOTE: To remove the motor cover, depress both sides of the cover and pull outward.
A
Fig. 31
MITER GAUGE HOLDER AND WRENCH HOLDER
You can store the miter gauge and arbor wrenches in the slots (A) Fig. 32 provided in the motor cover.
A
Fig. 32
ATTACHING THE RIP FENCE HOLDER BRACKETS
Use four #10 x 1/2" sheet metal screws to attach the rip fence holder brackets (A) and (B) Fig. 33 to the four holes located in the left hand side of the saw cabinet.
A
B 
Fig. 33
ATTACHING THE DUST CHUTE ADAPTER
The Unisaw is supplied with a dust chute adapter to connect a 4" diameter dust collector hose to the machine. Align the four holes in the adapter (A) Fig. 34 with the four holes in the back of the saw cabinet (B). Attach the dust chute adapter with four #10 x 1/2" sheet metal screws.
NOTE: Do not mount the dust chute adapter unless you use a dust collection system with the saw. Without the system, a dust chute adapter will restrict the gravity feed opening for saw dust removal.
A
B
Fig. 34
14
