OPERATING CONTROLS
TABLE HAZARD AREA
WARNING: THE AREA INSIDE THE TWO RED LINES (A) FIG. BB, ON THE TABLE IS DESIGNATED AS A HAZARD ZONE. NEVER PLACE YOUR HANDS INSIDE THIS AREA WHILE THE TOOL IS BEING OPERATED.
A
Fig. BB
STARTING AND
STOPPING SAW
To turn the saw “ON” push in on switch lock key (A) Fig. 13, and depress switch trigger (B). To turn the saw “OFF” release switch trigger (B).
Your compound miter saw is equipped with an automatic electric blade brake. As soon as the switch trigger (B) Fig. 13, is released, the electric brake is activated and stops the blade in seconds.
WARNING: A TURNING SAW BLADE CAN BE DANGEROUS. AFTER COMPLETING CUT, RELEASE SWITCH TRIGGER TO ACTIVATE BLADE BRAKE. KEEP SAW HEAD DOWN UNTIL BLADE HAS COME TO A COMPLETE STOP.
WARNING: THE TORQUE DEVELOPED DURING BRAKING MAY LOOSEN THE ARBOR SCREW. THE ARBOR SCREW SHOULD BE CHECKED PERIOD- ICALLY AND TIGHTENED IF NECESSARY.
A
B
Fig. 13
9
