ROTATING TABLE
FOR MITER CUTTING
Your compound miter saw will cut any miter angle from a straight 90 degree
The 10" Compound Miter Saw is equipped with positive miter stops for the table control arm at the 0, 15,
EN LOCK HANDLE (A) BEFORE CUTTING.
In addition, two triangle indicators (D) Fig. 15, are provid- ed on the scale at the
TILTING CUTTING ARM FOR BEVEL CUTTING
The cutting arm of your compound miter saw can be tilt- ed to cut any bevel angle from a 90 degree straight cut- off to a 45 degree left bevel angle by loosening bevel lock handle (A) Fig. 16, tilting cutting arm to the desired angle and tightening lock handle (A). NOTE: Lock handle (A) is spring loaded and can be repositioned by pulling out on the handle and repositioning it on the nut located under- neath the hub of the handle.
Positive stops are provided to rapidly position the saw blade at 90 and 45 degrees to the table. The bevel angle of the cutting arm is determined by the position of the pointer (B) Fig. 16, on the scale (C).
In addition, a triangle indicator (D) Fig. 17, is provided on the sale at the
B
A
C
Fig. 14
D
D
Fig. 15
A
C B
Fig. 16
D
Fig. 17
10
