Contractor’s Saw | Delta 36-441B, 36-451X instruction

10" Contractor’s Saw

(Models 36-441B, 36-451X)

INSTRUCTION MANUAL

NOTE: Shown with UniRip® Fence System

PART NO. 422-19-651-0058 - 03-22-04

Copyright © 2004 Delta Machinery

To learn more about DELTA MACHINERY

visit our website at: www.deltamachinery.com.

For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Delta 36-441B, 36-451X instruction manual Contractor’s Saw

Contents

Contractor’s Saw General Safety Rules Safety Guidelines DefinitionsImportant Safety Instructions Stay ALERT, Watch What YOU are DOING, Properly Support Long or Wide workpieces Additional Safety Rules for Contractor SAW Motor Specifications Power ConnectionsGrounding Instructions Volt Minimum Gauge Extension Cord Extension Cords Functional Description Unpacking and CleaningForeword Unpacking and Cleaning Rear Leg Panel Assembling SAW Stand SAW AssemblyAssembling SAW to Stand Disconnect Machine from the Power Source Motor AssemblyAssembling Blade Tilting Handwheel Assembling Motor to Motor Mounting Plate Assembling Motor and Motor Mounting Plate to SAW Disconnect Machine from Power Source To Motor Mounting Plate Assembling Motor PULLEY, Belt Pulley GUARD, and Drive Belt Illustrates the motor cord connected to the switch assembly Connecting Motor Cord to Switch Assembly Assembling Blade Guard Splitter Assembly Assembling and Aligning Blade Guard and Splitter Assembly If alignment is necessary, loosen the two screws Page Assembling Steel Extension Wing and Switch Model 36-441B Extension and Switch AssemblyAssembling Switch to Cast Iron Extension Wing Assembling Cast Iron Extension Operating Controls Fastening Stand to Supporting Surface Adjusting 90 Degree and 45 Degree Positive Stops Operation and AdjustmentsRaising and Lowering Blade Tilting the Blade Checking Blade Alignment Adjusting Blade AlignmentBlade Alignment Adjusting Blade Tilting Mechanism Backlash AdjustmentsChanging SAW Blade Miter Gage Operation and Adjustment Adjusting Table Insert Common Sawing Operations Never USE the Fence AS a CUT-OFF Gage When CROSS-CUTTINGCROSS-CUTTING Constructing a Push Stick Ripping Using Moulding Cutterhead Accessory Moulding Cutterhead Using Dado Head Accessory Dado Head Constructing a Featherboard Power Tool Institute Constructing a Push Stick Pushstick Storage MaintenanceDust Chute Repositioning Motor For Storage Accessories PARTS, Service or Warranty Assistance Canadian PORTER-CABLE Delta Service Centers