Delta 36-441B, 36-451X ASSEMBLING MOTOR AND MOTOR MOUNTING PLATE TO SAW

12
Fig. 14
Fig. 13
ASSEMBLING MOTOR AND MOTOR
MOUNTING PLATE TO SAW
DISCONNECT MACHINE FROM POWER
SOURCE.
1. Locate the two pins (X) Fig. 12 that insert into holes
(D) in each side of bracket (B). The pins (X) are spring (Y)
loaded from factory.
2. Position motor and motor mounting plate (A) Fig. 13
below bracket (B) to allow bracket arm to slide through
large opening in motor mounting plate (A).
3. Depress pins (C) Fig. 13, on both sides of bracket
(B) and rotate motor mounting plate (A) until pins (C) are
engaged in holes (D) Fig. 12, of motor mounting plate
(A).
4. Fig. 14 illustrates the motor and motor mounting
plate assembled to the rear of the saw.
B
D
A
C
B
C
A
Fig. 12
X
Y
X