15
17
18
19
16
22
20
21 |
| 23 |
|
Fig. 3
15 - Bottom Shelf
16 - Legs (3)
17 - Left Top Brace
18 - Right Top Brace
19 - Front Top Brace
20 - Height Adjustment Bracket for rear leg
21 - Flat Washers (28)
22 - 5/8" long (8mm) Carriage Bolts (28)
23 - Hex Nuts (28)
ASSEMBLY INSTRUCTIONS
WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE SCROLL SAW TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE READ AND UNDERSTOOD THE ENTIRE OWNERS MANUAL.
ASSEMBLING STAND
1.Assemble the stand, as shown in Fig. 4, using the 24 carriage bolts, flat washers and hex nuts. NOTE: The round holes on the top of the two top braces (A) are to be positioned toward the rear leg (B) and all three legs are positioned outside the bottom shelf and top braces. DO NOT TIGHTEN STAND MOUNT-
ING HARDWARE AT THIS TIME.
A
B
A
Fig. 4
6
