Delta 50-850 instruction manual Unpacking and Cleaning, Hardware not Shown

UNPACKING AND CLEANING

Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax. ILLUSTRATIONS ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING

OR ACCESSORIES AND MAY BE INTENDED TO ILLUSTRATE TECHNIQUE ONLY

Fig. 2

1 - Locking Bands for Filter and Dust Collection Bags (2)

2 - Filter Bag

3 - Dust Collection Bag

4 - Filter Bag Support Rod

5 - Extension Rod

6 - Clamps (2)

7 - 6" Dia. Flexible Hose

8 - Drum Support (3)

9- Casters (3/8" Lockwashers, 3/8-16 Hex Nuts) (4)

10 - “U” Bracket for Filter Bag Support Rod

11 - Lower Dust Bag retaining Clips (4)

Fig. 3

12 - Blower and Motor Assembly

13- Clamp

14- 4" Dia. Flexible Hose

15- Intake Port

16- Base

17- Intake Caps (2)

18- Drum

HARDWARE NOT SHOWN

* - 5/16"-18 x 5/8"

Hex Head Screws (20)

*- 5/16" Lockwashers (24)

*- 5/16"-18 Hex Nuts (12)

*- 5/16" x 7/8" O.D.

Flat Washers (6)

*- M4.2 Sheet Metal Screws (4)

*- 1/4-20x5/8" Hex Head Screws (8)

*- 1/4" Lockwashers (8)

*- 1/4"-20 Hex Nuts (8)

7

4 6

2 9

10

5

8

11

3

1

Fig. 2

12

15

18

17

16

13

14

Fig. 3

4