If you purchased the accessory leg kit (model 78-952) for use with the right extension table, Figure 4 illustrates the legs and loose items supplied with this accessory.
1- Legs (2)
2- 5/8 long wood screws #8 (8)
3- 1/4-20 x 1-1/2 long flat head Phillips screws (4)
4- 1/4 flat washers (4)
5- 1/4-20 hex nuts (4)
1
3
4
5
2
Fig. 4
ASSEMBLY INSTRUCTIONS
When retrofitting the T-SquarefiFence System to table saws that have been equipped with original equipment fence, guide rails and extension wings, remove the fence, front and rear guide rails and right hand extension wing from the saw. If you purchased the saw and T-Squarefifence system as a promotional item, assemble the saw as explained in the machine instruction manual and proceed to assemble the T-Squarefifence to the saw as follows:
1. DISCONNECT THE S AW F R O M THE P O W E R SOURCE.
