Delta D29382 Danger, What Can Happen, How To Prevent It, Risk To Fluid Injection

Models: D29382

1 18
Download 18 pages 41.6 Kb
Page 3
Image 3
RISK TO FLUID INJECTION

DANGER

RISK OF EXPLOSION OR FIRE

WHAT CAN HAPPEN

Use of acids, unapproved chemicals, or flammable solvents with this product could cause injury or death.

Restricting any of the pressure washer ventilation openings will cause serious overheating and could cause fire.

HOW TO PREVENT IT

Do not use acids, gasoline, kerosene, or any other flammable materials in this product. Use only household detergents, cleaners, and degreasers recommended for use in Pressure Washers. Work in a well ventilated area.

Never place objects against or on top of pressure washer. Operate pressure washer in an open area at least 12 inches away from any wall or obstruction that would restrict the flow of fresh air to the ventilation openings.

DANGER

RISK TO BREATHING

WHAT CAN HAPPEN

HOW TO PREVENT IT

Some cleaning fluids contain substances which could cause injury to skin, eyes, or lungs.

Use only cleaning fluids specifically recom- mended for high pressure washers. Follow manufacturers recommendations. Do not use chlorine bleach or any other corrosive compound.

DANGER

RISK TO FLUID INJECTION

WHAT CAN HAPPEN

Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID

INJECTION AS A SIMPLE CUT! See a physician immediately!

Injuries can result if system pressure is not reduced before attempting maintenance or disassembly.

HOW TO PREVENT IT

Never place hands in front of nozzle.

Do not direct discharge stream at persons or animals.

Make sure hose and fittings are tightened and in good condition. Never hold onto the hose or fittings during operation.

Do not operate pressure washer with worn or a braided hose.

Never attach or remove wand or hose fittings while system is pressurized.

To relieve system pressure, place on/off switch in off position, turn off water supply, and pull gun trigger until water stops flowing.

Use only hose and high pressure accessories rated for pressure higher than your pressure washer's p.s.i.

3- ENG

D29382

Page 3
Image 3
Delta D29382 instruction manual Danger, What Can Happen, How To Prevent It, Risk To Fluid Injection