OPERATING INSTRUCTIONS
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
| Spray |
High | Gun |
Pressure |
|
Hose | Electric |
| Cord |
Spray
Wand with Variable Spray
Nozzle
Motor
ON-OFF
ON-OFFWaterswitch outlet
Motor
Water
inlet with 
filterCleaning Solution
High Pressure Pump
application unit
Rotary Nozzle
BASIC ELEMENTS OF A PRESSURE WASHER
High Pressure Pump (located inside the shroud): Increases the pressure of the water supply.
Motor (located inside the shroud): Drives the high pressure pump.
High Pressure Hose: Carries the pressurized water from the pump to the gun and wand.
Spray Gun: Connects with wand to control water flow rate, direction, and pressure.
Spray Wand With Variable Spray Nozzle: Spray nozzle adjusts from a narrow jet stream to a fan jet spray. The spray can be adjusted by twisting the nozzle clockwise and/or counterclockwise.
Rotary nozzle
Cleaning Solution Application Unit - Used to apply cleaning solutions, see How To Use Cleaning Solution Application Unit in this section.
PRESSURE WASHER TERMINOLOGY
Ground Fault Circuit Interrupter Protection (GFCI): This washer is provided with a ground fault circuit interrupter (GFCI) built into the plug of the power supply cord. This device provides additional protection from the risk of electric shock. Should replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI protection.
D29382 | 8- ENG |
