HAZARD

WARNING: Risk of Bursting

Air Tank: The following conditions could lead to a weakening of the tank, and result in a violent tank explosion and could cause property damage or serious injury.

What Could Happen

1.Failure to properly drain con- densed water from tank, causing rust and thinning of the steel tank.

2.Modifications or attempted repairs to the tank.

3.Unauthorized modifications to the unloader valve, safety valve, or any other components which control tank pressure.

4.Excessive vibration can weaken the air tank and cause rupture or explosion

ATTACHMENTS & ACCESSORIES:

Exceeding the pressure rating of air tools, spray guns, air operated acces- sories, tires, and other inflatables can cause them to explode or fly apart, and could result in serious injury.

How To Prevent It

Drain tank daily or after each use. If tank develops a leak, replace it immedi- ately with a new tank or replace the entire compressor.

Never drill into, weld, or make any modi- fications to the tank or its attachments.

The tank is designed to withstand specific operating pressures. Never make adjust- ments or parts substitutions to alter the factory set operating pressures.

For essential control of air pressure, you must install a pressure regulator and pressure gauge to the air outlet (if not equipped) of your compressor. Follow the equipment manufacturers recommenda- tion and never exceed the maximum allowable pressure rating of attachments.

Never use compressor to inflate small low pressure objects such as children’s toys, footballs, basketballs, etc.

HAZARD

WARNING: Risk from Flying Objects

WHAT CAN HAPPEN

The compressed air stream can cause soft tissue damage to exposed skin and can propel dirt, chips, loose particles, and small objects at high speed, result- ing in property damage or personal injury.

HOW TO PREVENT IT

Always wear ANSI Z87.1 approved safety glasses with side shields when using the compressor.

Never point any nozzle or sprayer toward any part of the body or at other people or animals.

Always turn the compressor off and bleed pressure from the air hose and tank before attempting maintenance, attaching tools or accessories.

D26161

4-ENG

Page 3 Page 5
Page 4
Image 4
Delta DLKC6580V2-1 instruction manual Attachments & Accessories
Page 3 Page 5

DLKC6580V2-1 specifications

The Delta DLKC6580V2-1 is an advanced industrial AC servo drive designed to deliver exceptional performance and efficiency in a wide range of automation applications. This servo drive is engineered to enhance system responsiveness while ensuring precise motion control, making it an ideal choice for industries such as manufacturing, packaging, and robotics.

One of the standout features of the DLKC6580V2-1 is its high-speed communication capabilities. The drive supports various communication protocols including EtherCAT, CANopen, and Modbus RTU, ensuring seamless integration into existing systems. This flexibility allows users to connect multiple drives in a network, facilitating coordinated motion control and optimizing the performance of complex machinery.

The DLKC6580V2-1 boasts a powerful control algorithm that provides excellent torque performance and dynamic response. The drive utilizes advanced PWM (Pulse Width Modulation) technology, allowing for smooth operation across a broad range of speeds. This results in minimizing vibrations and improving the overall lifespan of connected servo motors.

In terms of ease of use, the DLKC6580V2-1 features an intuitive user interface with built-in diagnostics and monitoring capabilities. This user-friendly design allows operators to configure parameters swiftly, monitor real-time performance, and troubleshoot any issues effectively. Additionally, it supports maintenance-free operation, significantly reducing downtime and operational costs.

Safety is a priority with the DLKC6580V2-1, which includes multiple safety features like over-voltage, over-current, and temperature protection. The drive is also compliant with international safety standards, ensuring it can be deployed in various environments without compromising personnel safety.

Moreover, the DLKC6580V2-1 is designed to operate efficiently across a wide range of temperatures, making it suitable for different working conditions. Its robust construction ensures reliability and durability, which is crucial for demanding industrial applications.

In conclusion, the Delta DLKC6580V2-1 AC servo drive is a high-performance solution that combines advanced control technology, versatile communication options, and user-friendly features. Its robust safety measures and adaptability to varying operational conditions make it an essential component for enhancing automation in modern industrial setups. Whether for precision machining or complex automation processes, the DLKC6580V2-1 stands as a reliable choice for engineers and manufacturers aiming to optimize their production capabilities.
Top Page Image Contents