HAZARD

WARNING: Risk of Electrical Shock

WHAT CAN HAPPEN

Your air compressor is powered by electricity. Like any other electrically powered device, If it is not used properly it may cause electric shock.

Repairs attempted by unqualified per- sonnel can result in serious injury or death by electrocution.

Electrical Grounding: Failure to provide adequate grounding to this product could result in serious injury or death from electrocution.

See grounding instructions.

HOW TO PREVENT IT

Never operate the compressor outdoors when it is raining or in wet conditions.

Never operate compressor with protec- tive covers removed or damaged.

Any electrical wiring or repairs required on this product should be performed by authorized service center personnel in accordance with national and local electri- cal codes.

Make certain that the electrical circuit to which the compressor is connected provides proper electrical grounding, correct voltage and adequate fuse pro- tection.

HAZARD

WARNING: Risk to Breathing

WHAT CAN HAPPEN

The compressed air directly from your compressor is not safe for breathing. The air stream may contain carbon monoxide, toxic vapors, or solid parti- cles from the tank. Breathing these con- taminants can cause serious injury or death.

Sprayed materials such as paint, paint solvents, paint remover, insecticides, weed killers, may contain harmful vapors and poisons.

HOW TO PREVENT IT

Air obtained directly from the compressor should never be used to supply air for human consumption. In order to use air produced by this compressor for breath- ing, suitable filters and in-linesafety equipment must be properly installed. In-linefilters and safety equipment used in conjunction with the compressor must be capable of treating air to all applica- ble local and federal codes prior to human consumption.

Work in an area with good cross venti- lation. Read and follow the safety instructions provided on the label or safety data sheets for the materials you are spraying. Use a NIOSH/ MSHA approved respirator designed for use with your specific application.

5-ENG

D26161

Page 4 Page 6
Page 5
Image 5
Delta DLKC6580V2-1 instruction manual Hazard
Page 4 Page 6

DLKC6580V2-1 specifications

The Delta DLKC6580V2-1 is an advanced industrial AC servo drive designed to deliver exceptional performance and efficiency in a wide range of automation applications. This servo drive is engineered to enhance system responsiveness while ensuring precise motion control, making it an ideal choice for industries such as manufacturing, packaging, and robotics.

One of the standout features of the DLKC6580V2-1 is its high-speed communication capabilities. The drive supports various communication protocols including EtherCAT, CANopen, and Modbus RTU, ensuring seamless integration into existing systems. This flexibility allows users to connect multiple drives in a network, facilitating coordinated motion control and optimizing the performance of complex machinery.

The DLKC6580V2-1 boasts a powerful control algorithm that provides excellent torque performance and dynamic response. The drive utilizes advanced PWM (Pulse Width Modulation) technology, allowing for smooth operation across a broad range of speeds. This results in minimizing vibrations and improving the overall lifespan of connected servo motors.

In terms of ease of use, the DLKC6580V2-1 features an intuitive user interface with built-in diagnostics and monitoring capabilities. This user-friendly design allows operators to configure parameters swiftly, monitor real-time performance, and troubleshoot any issues effectively. Additionally, it supports maintenance-free operation, significantly reducing downtime and operational costs.

Safety is a priority with the DLKC6580V2-1, which includes multiple safety features like over-voltage, over-current, and temperature protection. The drive is also compliant with international safety standards, ensuring it can be deployed in various environments without compromising personnel safety.

Moreover, the DLKC6580V2-1 is designed to operate efficiently across a wide range of temperatures, making it suitable for different working conditions. Its robust construction ensures reliability and durability, which is crucial for demanding industrial applications.

In conclusion, the Delta DLKC6580V2-1 AC servo drive is a high-performance solution that combines advanced control technology, versatile communication options, and user-friendly features. Its robust safety measures and adaptability to varying operational conditions make it an essential component for enhancing automation in modern industrial setups. Whether for precision machining or complex automation processes, the DLKC6580V2-1 stands as a reliable choice for engineers and manufacturers aiming to optimize their production capabilities.
Top Page Image Contents