INSTALLATION

HOW TO SET UP YOUR UNIT

Location of the Air Compressor

•Locate the air compressor in a clean, dry, and well ventilated area.

•Locate the air compressor at least 12” away from the wall or other obstructions that will inter- fere with the flow of air.

•Locate the air compressor as close to the main power supply as possible to avoid using long lengths of electrical wiring. NOTE: Long lengths of electrical wiring could cause power loss to the motor.

•The air filter must be kept clear of obstructions which could reduce air flow to the air com- pressor.

Anchoring of the Air

Compressor

Excessive Vibration can weaken the air

tank and cause an explosion. The compressor must be properly mounted.

The air compressor MUST be bolted to a solid, level surface.

Hardware needed:

4 - Concrete anchors (not sup- plied)

4 - 3/8” Lag screw to fit con- crete anchors (not supplied)

4 - 5/8” Washer shims (found in parts bag, if needed)

1.Place the air compressor on on a solid, level surface.

2.Mark the surface using the holes in the air compressor feet as a template.

3.Drill holes in the surface for the concrete anchors. Install con- crete anchors.

4.Line-up holes in surface with holes in air compressor feet.

5.Place the (4) washers (not sup- plied) between the floor and air compressor feet. If needed, solid shims may be placed between the washers and floor to evenly distribute weight on all four feet. See next figure.

 

3/8” Lag Screw

 

(not supplied)

5/8” Washer

 

(not supplied)

 

Shim Under

Surface Line

Concrete Anchor

Washer

(not supplied)

(not supplied)

6.Place the (4) 3/8” lag screws through the air compressor feet, washers, shims, and into the anchors.

7.Torque 3/8” lag screws to 7-10 ft.-lbs.

D26161

10-ENG

Page 9 Page 11
Page 10
Image 10
Delta DLKC6580V2-1 instruction manual Installation, Location of the Air Compressor, Anchoring of the Air Compressor
Page 9 Page 11

DLKC6580V2-1 specifications

The Delta DLKC6580V2-1 is an advanced industrial AC servo drive designed to deliver exceptional performance and efficiency in a wide range of automation applications. This servo drive is engineered to enhance system responsiveness while ensuring precise motion control, making it an ideal choice for industries such as manufacturing, packaging, and robotics.

One of the standout features of the DLKC6580V2-1 is its high-speed communication capabilities. The drive supports various communication protocols including EtherCAT, CANopen, and Modbus RTU, ensuring seamless integration into existing systems. This flexibility allows users to connect multiple drives in a network, facilitating coordinated motion control and optimizing the performance of complex machinery.

The DLKC6580V2-1 boasts a powerful control algorithm that provides excellent torque performance and dynamic response. The drive utilizes advanced PWM (Pulse Width Modulation) technology, allowing for smooth operation across a broad range of speeds. This results in minimizing vibrations and improving the overall lifespan of connected servo motors.

In terms of ease of use, the DLKC6580V2-1 features an intuitive user interface with built-in diagnostics and monitoring capabilities. This user-friendly design allows operators to configure parameters swiftly, monitor real-time performance, and troubleshoot any issues effectively. Additionally, it supports maintenance-free operation, significantly reducing downtime and operational costs.

Safety is a priority with the DLKC6580V2-1, which includes multiple safety features like over-voltage, over-current, and temperature protection. The drive is also compliant with international safety standards, ensuring it can be deployed in various environments without compromising personnel safety.

Moreover, the DLKC6580V2-1 is designed to operate efficiently across a wide range of temperatures, making it suitable for different working conditions. Its robust construction ensures reliability and durability, which is crucial for demanding industrial applications.

In conclusion, the Delta DLKC6580V2-1 AC servo drive is a high-performance solution that combines advanced control technology, versatile communication options, and user-friendly features. Its robust safety measures and adaptability to varying operational conditions make it an essential component for enhancing automation in modern industrial setups. Whether for precision machining or complex automation processes, the DLKC6580V2-1 stands as a reliable choice for engineers and manufacturers aiming to optimize their production capabilities.
Top Page Image Contents