Clearing a Jammed Fastener

Disconnect tool from air supply.

1.Open magazine and remove remaining fasteners (Fig. 28 and Fig. 29).

Remove fasteners from tool before opening the fastener guide plate. Fasteners are under pressure and may shoot out of magazine which could cause injury.

2.Open the quick release latch and the fastener guide plate (Fig. 30).

3.Remove the jammed fastener (Fig. 31).

4.Close the fastener guide plate, and the quick release latch.

Fig. 28

Fig. 29

Fig. 30

Fig. 31

Page 11

Image 11

Delta DBS125, DNS100, DBN125 instruction manual Clearing a Jammed Fastener

Contents

Brad Nailer/Stapler Date of Manufacture Important Safety Instructions Safety Guidelines / Definitions General Safety Rules Page Page Functional Description Power SourceEMPLOYER’S Responsibilities Preparing the Tool Operating Instructions Using the Tool Rubber Nose Cushion Clearing a Jammed Fastener Service and Repairs MaintenanceClean and Inspect Daily Symptom Problems Troubleshooting Accessories Two Year Limited New Product Warranty Canadian PORTER-CABLE Delta Service Centers