GENERAL SAFETY RULES
READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below, may result in electric shock, fire, and/or serious personal injury or property damage.
IMPORTANT SAFETY INSTRUCTIONS
1. FOR YOUR OWN SAFETY, READ THE INSTRUCTION |
MANUAL BEFORE OPERATING THE MACHINE. |
Learning the machine’s application, limitations, and |
specific hazards will greatly minimize the possibility of |
accidents and injury. |
2. WEAR EYE AND HEARING PROTECTION. |
ALWAYS USE SAFETY GLASSES. Everyday |
eyeglasses are NOT safety glasses. USE CERTIFIED |
SAFETY EQUIPMENT. Eye protection equipment |
should comply with ANSI Z87.1 standards. Hearing |
equipment should comply with ANSI S3.19 |
standards. |
3. WEAR PROPER APPAREL. Do not wear loose |
clothing, gloves, neckties, rings, bracelets, or other |
jewelry which may get caught in moving parts. Nonslip |
footwear is recommended. Wear protective hair |
covering to contain long hair. |
4. DO NOT USE THE MACHINE IN A DANGEROUS |
ENVIRONMENT. The use of power tools in damp or |
wet locations or in rain can cause shock or |
electrocution. Keep your work area |
tripping or placing arms, hands, and fingers in danger. |
5. MAINTAIN ALL TOOLS AND MACHINES IN PEAK |
CONDITION. Keep tools sharp and clean for best and safest |
performance. Follow instructions for lubricating and changing |
accessories. Poorly maintained tools and machines can further |
damage the tool or machine and/or cause injury. |
6. CHECK FOR DAMAGED PARTS. Before using the |
machine, check for any damaged parts. Check for |
alignment of moving parts, binding of moving parts, |
breakage of parts, and any other conditions that may |
affect its operation. A guard or any other part that is |
damaged should be properly repaired or replaced. |
Damaged parts can cause further damage to the |
machine and/or injury. |
7. KEEP THE WORK AREA CLEAN. Cluttered areas and |
benches invite accidents. |
8. KEEP CHILDREN AND VISITORS AWAY. Your shop is a |
potentially dangerous environment. Children and visitors can |
be injured. |
9. REDUCE THE RISK OF UNINTENTIONAL STARTING. |
Make sure that the switch is in the “OFF” position |
before plugging in the power cord. In the event of a |
power failure, move the switch to the “OFF” position. |
Delta may cause damage to the machine or injury to the user.
14.USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage, resulting in loss of power and overheating. See the Extension Cord Chart for the correct size depending on the cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
15.SECURE THE WORKPIECE. Use clamps or a vise to hold the workpiece when practical. Loss of control of a workpiece can cause injury.
16.FEED THE WORKPIECE AGAINST THE DIRECTION OF THE ROTATION OF THE BLADE, CUTTER, OR ABRASIVE SURFACE. Feeding it from the other direction will cause the workpiece to be thrown out at high speed.
17.DON’T FORCE THE WORKPIECE ON THE MACHINE. Damage to the machine and/or injury may result.
18.DON’T OVERREACH. Loss of balance can make you fall into a working machine, causing injury.
19.NEVER STAND ON THE MACHINE. Injury could occur if the tool tips, or if you accidentally contact the cutting tool.
20.NEVER LEAVE THE MACHINE RUNNING UNATTENDED. TURN THE POWER OFF. Don’t leave the machine until it comes to a complete stop. A child or visitor could be injured.
21.TURN THE MACHINE “OFF”, AND DISCONNECT THE MACHINE FROM THE POWER SOURCE before installing or removing accessories, before adjusting or changing
22.MAKE YOUR WORKSHOP CHILDPROOF WITH PADLOCKS, MASTER SWITCHES, OR BY REMOVING STARTER KEYS. The accidental
23. STAY ALERT, WATCH WHAT YOU ARE DOING, AND
USE COMMON SENSE. DO NOT USE THE MACHINE WHEN YOU ARE TIRED OR UNDER THE INFLUENCE OF DRUGS, ALCOHOL, OR MEDICAT- ION. A moment of inattention while operating power tools may result in injury.
24. 
USE OF THIS TOOL CAN GENERATE
| An accidental |
10. | USE THE GUARDS. Check to see that all guards are |
| in place, secured, and working correctly to reduce |
| the risk of injury. |
11. | REMOVE ADJUSTING KEYS AND WRENCHES |
| BEFORE STARTING THE MACHINE. Tools, scrap |
| pieces, and other debris can be thrown at high speed, |
| causing injury. |
12. | USE THE RIGHT MACHINE. Don’t force a machine or |
| an attachment to do a job for which it was not |
| designed. Damage to the machine and/or injury may |
| result. |
13. | USE RECOMMENDED ACCESSORIES. The use of |
| accessories and attachments not recommended by |
4
AND DISBURSE DUST OR OTHER AIRBORNE PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE SILICA DUST AND ASBESTOS DUST. Direct particles away from face and body. Always operate tool in well ventilated area and provide for proper dust removal. Use dust collection system wherever possible. Exposure to the dust may cause serious and permanent respiratory or other injury, including silicosis (a serious lung disease), cancer, and death. Avoid breathing the dust, and avoid prolonged contact with dust. Allowing dust to get into your mouth or eyes, or lay on your skin may promote absorption of harmful material. Always use properly fitting NIOSH/OSHA approved respiratory protection appropriate for the dust exposure, and wash exposed areas with soap and water.
