Belt / 6 Disc Sander | Delta SA446 instruction

4" Belt / 6" Disc Sander

(Model SA446)

INSTRUCTION MANUAL

PART NO. 905578 -05-03-02

Copyright © 2002 Delta Machinery

To learn more about DELTA MACHINERY	ESPAÑOL: PÁGINA 21
visit our website at: www.deltamachinery.com.
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Delta SA446 instruction manual Belt / 6 Disc Sander

Contents

Belt / 6 Disc Sander General Safety Rules Refer to them often Use them to instruct others Additional Safety Rules for Belt / Disc Sanders Power Connections Extension Cords Unpacking and Cleaning Sander Parts Belt / 6 Disc Sander Parts Adjusting Belt Tension Assembly Instructions Assembling Sanding Disc Plate Assembling Belt Pulley Guard Assembling Lower Cover for Sanding Disc Assembling Sanding DiscAssembling Disc Sander Table Assembling Dust Chute Fastening Sander to Supporting SurfaceAssembling Backstop to Sanding ARM Starting Stopping Sander Operating Controls Adjustments Tracking Sanding Belt Locking Switch OFF PositionChanging Position of Sanding ARM Adjusting Table Square with Sanding Disc Adjusting Backstop Square With Sanding BeltTilting the Table Miter Gage Adjusting Miter Gage Slot Parallel with Sanding Disc Wrench Storage Dust Chute Replacing Sanding Disc Replacing Sanding Belt Surfacing or Edge Sanding With Sanding Belt Operation Sanding Outside Curves Sanding Inside CurvesEND Sanding With the Belt END Sanding With the DiscPage Two Year Limited Warranty Accessories PARTS, Service or Warranty Assistance