Through-Hole Module

MECHANICAL DRAWING (WITH HEATSPREADER)

DS_E36SR05015_01042008

Image 14

Contents

FEATURES DC/DC Power Modules 18~75V in, 5V/15A outDelphi Series E36SR, 75W Eighth Brick Family OPTIONS OUTPUT CHARACTERISTICS TECHNICAL SPECIFICATIONSINPUT CHARACTERISTICS DYNAMIC CHARACTERISTICS ELECTRICAL CHARACTERISTICS CURVES Figure 4 Turn-on transient at full rated load current CC mode current 25%-50% of Io, max di/dt = 0.1A/µs. Load cap 10µF tantalum capacitor and 1µF ceramic capacitor. Top Trace Vout Figure 12 Input reflected ripple current, is, through a 12µH DESIGN CONSIDERATIONS Safety ConsiderationsSoldering and Cleaning Considerations Input Source Impedance Over-Voltage Protection FEATURES DESCRIPTIONSOver-Current Protection Over-Temperature Protection Rtrim − down = 511Δ − 10.2KΩ FEATURES DESCRIPTIONS CONOutput Voltage Adjustment TRIM Rtrim − up = THERMAL CURVES Thermal Testing SetupTHERMAL CONSIDERATIONS Thermal Derating SURFACE-MOUNT TAPE & REEL PICK AND PLACE LOCATIONRECOMMENDED PAD LAYOUT SMD Temp LEADED Sn/Pb PROCESS RECOMMEND TEMP. PROFILELEAD FREE SAC PROCESS RECOMMEND TEMP. PROFILE Time Through-hole module MECHANICAL DRAWINGSurface-mount module Name MECHANICAL DRAWING WITH HEATSPREADER THROUGH-HOLE MODULE WARRANTY PART NUMBERING SYSTEMMODEL LIST MODEL NAME