Manuals / Delta Electronics / Computer Equipment / Power Supply

Delta Electronics Series E36SR Mechanical Drawing, Surface-mount module, Through-hole module

Models: Series E36SR

1 15

Download 15 pages 23.45 Kb

Page 13

MECHANICAL DRAWING

MECHANICAL DRAWING

Surface-mount module

Through-hole module

Pin No.	Name	Function
1	+Vin	Positive input voltage
2	ON/OFF	Remote ON/OFF
3	-Vin	Negative input voltage
4	-Vout	Negative output voltage
5	-SENSE	Negative remote sense
6	TRIM	Output voltage trim
7	+SENSE	Positive remote sense
8	+Vout	Positive output voltage

DS_E36SR05015_01042008

13

Image 13

Delta Electronics Series E36SR manual Mechanical Drawing, Surface-mount module, Through-hole module, Name, Function, Pin No

Contents

Delphi Series E36SR, 75W Eighth Brick Family DC/DC Power Modules 18~75V in, 5V/15A outFEATURES OPTIONSINPUT CHARACTERISTICS TECHNICAL SPECIFICATIONSOUTPUT CHARACTERISTICS DYNAMIC CHARACTERISTICSELECTRICAL CHARACTERISTICS CURVES Figure 4 Turn-on transient at full rated load current CC mode ELECTRICAL CHARACTERISTICS CURVEScurrent 25%-50% of Io, max di/dt = 0.1A/µs. Load cap 10µF ELECTRICAL CHARACTERISTICS CURVEStantalum capacitor and 1µF ceramic capacitor. Top Trace Vout Figure 12 Input reflected ripple current, is, through a 12µH ELECTRICAL CHARACTERISTICS CURVESSoldering and Cleaning Considerations Safety ConsiderationsDESIGN CONSIDERATIONS Input Source ImpedanceOver-Temperature Protection FEATURES DESCRIPTIONSOver-Current Protection Over-Voltage ProtectionOutput Voltage Adjustment TRIM FEATURES DESCRIPTIONS CONRtrim − down = 511Δ − 10.2KΩ Rtrim − up =THERMAL CONSIDERATIONS Thermal Testing SetupTHERMAL CURVES Thermal DeratingRECOMMENDED PAD LAYOUT SMD PICK AND PLACE LOCATIONSURFACE-MOUNT TAPE & REEL LEAD FREE SAC PROCESS RECOMMEND TEMP. PROFILE LEADED Sn/Pb PROCESS RECOMMEND TEMP. PROFILETemp TimeSurface-mount module MECHANICAL DRAWINGThrough-hole module NameTHROUGH-HOLE MODULE MECHANICAL DRAWING WITH HEATSPREADERMODEL LIST PART NUMBERING SYSTEMWARRANTY MODEL NAME