Pick And Place Location

RECOMMENDED PAD LAYOUT (SMD)

DS_E36SR05015_01042008

Image 11

Contents

OPTIONS DC/DC Power Modules 18~75V in, 5V/15A outDelphi Series E36SR, 75W Eighth Brick Family FEATURES DYNAMIC CHARACTERISTICS TECHNICAL SPECIFICATIONSINPUT CHARACTERISTICS OUTPUT CHARACTERISTICS ELECTRICAL CHARACTERISTICS CURVES Figure 4 Turn-on transient at full rated load current CC mode tantalum capacitor and 1µF ceramic capacitor. Top Trace Vout current 25%-50% of Io, max di/dt = 0.1A/µs. Load cap 10µF Figure 12 Input reflected ripple current, is, through a 12µH Input Source Impedance Safety ConsiderationsSoldering and Cleaning Considerations DESIGN CONSIDERATIONS Over-Temperature Protection FEATURES DESCRIPTIONSOver-Current Protection Over-Voltage Protection Rtrim − up = FEATURES DESCRIPTIONS CONOutput Voltage Adjustment TRIM Rtrim − down = 511Δ − 10.2KΩ Thermal Derating Thermal Testing SetupTHERMAL CONSIDERATIONS THERMAL CURVES SURFACE-MOUNT TAPE & REEL PICK AND PLACE LOCATIONRECOMMENDED PAD LAYOUT SMD Time LEADED Sn/Pb PROCESS RECOMMEND TEMP. PROFILELEAD FREE SAC PROCESS RECOMMEND TEMP. PROFILE Temp Name MECHANICAL DRAWINGSurface-mount module Through-hole module THROUGH-HOLE MODULE MECHANICAL DRAWING WITH HEATSPREADER MODEL NAME PART NUMBERING SYSTEMMODEL LIST WARRANTY