Mechanical Drawing, Name Function | Delta Electronics Series S48SP

MECHANICAL DRAWING

Surface-mount module

Through-Hole module

Pin No.	Name	Function
1	+Vin	Positive input voltage
2	-Vin	Negative input voltage
3	ON/OFF (Optional)	Remote ON/OFF (Optional)
4	-Vout	Negative output voltage
5	TRIM (Optional)	Output voltage trim (Optional)
6	+Vout	Positive output voltage

DS_S48SP3R310_05222008

13

Image 13

Delta Electronics Series S48SP manual Mechanical Drawing, Name Function

Contents

Features Parameter Technical Specifications Typical full load input characteristics at room temperature Electrical Characteristics Curves For Negative Remote On/Off Logic Electrical Characteristics Curves Input reflected ripple current, is, through a 12µH Input Source Impedance Design Considerations Over-Temperature Protection Features DescriptionsOver-Current Protection Remote On/Off Output Voltage Adjustment Features Descriptions CON Thermal Considerations Thermal Testing SetupThermal Curves Thermal Derating Recommended PAD Layout SMD Pick and Place Location Lead Free SAC Process Recommend TEMP. Profile Leaded Sn/Pb Process Recommend TEMP. Profile Name Function Mechanical Drawing Model List Part Numbering System