ELECTRICAL CHARACTERISTICS CURVES
Vo(+)
0
Copper Strip
10u | 1u | SCOPE | RESISTIV |
| LOAD | ||
|
|
|
Figure 12: Input reflected ripple current, is, through a 12µH | Figure 13: Output voltage noise and ripple measurement test |
source inductor at nominal input voltage and rated load current | setup |
(20 mA/div, 1us/div) |
|
0
Figure 14: Output voltage ripple at nominal input voltage and rated load current (Io=10A)(20 mV/div, 1us/div)
Load capacitance: 1µF ceramic capacitor and 10µF tantalum
capacitor. Bandwidth: 20 MHz. Scope measurements should be made using a BNC cable (length shorter than 20 inches). Position the load between 51 mm to 76 mm (2 inches to 3 inches) from the module
Figure 15: Output voltage vs. load current showing typical current limit curves and converter shutdown points
DS_S48SP3R310_05222008 | 6 |
