

Getting Started Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications
With HDMI connections, the video and audio signals can be transferred
with a single cable.
065
)%.*
*/
)%.*
Compatible audio
format Details Discs
(examples)
2-channel linear PCM 2ch 32-192 kHz
16/20/24 bits
CD, DVD-Video,
DVD-Audio
Multi-channel linear
PCM
8ch 32-192 kHz
16/20/24 bits DVD-Audio
Dolby Digital, DTS Bitstream DVD-Video
DSD
2/5.1ch
2.8224 MHz
1 bit
SACD
Dolby Digital Plus,
Dolby TrueHD,
DTS-HD
Bitstream HD DVD,
Blu-ray Disc
Monitor
DVD
player
b The AVP-A1HDCI is supported to the feature of HDMI listed below.
30 and 36 bit Deep Color
xvYCC
Auto Lipsync Correction
Copyright protection system (HDCP)
In order to play the digital video and audio signals of a DVD- Video or
DVD-Audio disc using HDMI/DVI connections, both the connected
DVD player and monitor must be equipped for a copyright protection
system called “HDCP” (High-bandwidth Digital Content Protection).
HDCP is a copy protection technology consisting of data encoding
and mutual identification of the devices.
The AVP-A1HDCI is HDCP-compatible. For details on the DVD player
or monitor you are using, refer to its operating instructions.
When connecting with an HDMI/DVI converter cable
(adapter)
HDMI video signals are theoretically compatible with the DVI
format.
When connecting to a monitor, etc., equipped with a DVI-D
connector, connection is possible using an HDMI/DVI converter
cable, but depending on the combination of components in some
cases the video signals will not be output.
When connecting using an HDMI/DVI converter adapter, the video
signals may not be output properly due to poor connections with
the connected cable, etc.
By default, HDMI sound is output from the speaker of the power
amp connected to AVP-A1HDCI.
To output the sound from the TV, make the settings at GUI menu
“Manual Setup” – “HDMI Setup” – “Audio” – “TV” (vpage 32).

Connecting Equipment with HDMI

connectors

Operations
1Connect AVP-A1HDCI and POA-A1HDCI with the
control link cable.
b The control link cable is included with the POA-A1HDCI.
b AVP-A1HDCI can be connected and control to up to 2 POA-
A1HDCI units.
Refer to the POA-A1HDCI user’s manual for how to connect.
2Set the POA-A1HDCI’s control selector switch to
“AVP���.
3Set the POA-A1HDCI’s mode select switch according
to the number of POA-A1HDCI units you are
connecting.
When connecting 1 unit : “1”
When connecting 2 units : 1st unit “1”, 2nd unit “2”
b Refer to the POA-A1HDCI owner’s manual for details.
4Switch the AVP-A1HDCI and POA-A1HDCI power
on.
5Depending on the number of POA-A1HDCI units to
be connected, set GUI menu “Option Setup” – “POA
Setting” “POA LINK” to either “ON (Single)” or
“ON (Dual)” (vpage 41).
6Use GUI menu “Option Setup” “POA Setting”
– “LINK Check” to check the connection.
Connections