

Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting Specifications

Information

a MAIN ZONE

Shows information about settings for MAIN ZONE.
The items displayed differ according to the input source.

s ZONE2/3/4

Shows information about settings for multi-zone.
[Items to be checked]
Select Source Name Surround Mode Input Mode Room EQ
Dynamic EQ Video Select i/p Scaler Source Level
Rec Select Night Mode RESTORER etc.
[Items to be checked]
Power Select Source Volume Level
When the input signal is 1080p the “Picture Adjust” setting will be
ineffective.
Adjusting the “Contrast”, “Brightness”, “Chroma Level” and “Hue”
settings does not affect the HDMI input signal.
“Hue” can be adjusted for composite video and S-Video signals.
The adjustment values are stored for the individual input sources.
“DNR”, “Enhancer”, and “Sharpness” are each effective with HDMI
output. However, they are ineffective with 480i/576i output.

f Hue

Adjust color hue.
[Variable range] –6 ~ 0 ~ +6

g DNR

Reduces the overall level of noise on the picture.
[Selectable items] OFF Low Middle High

h Enhancer

Emphasize picture contours.
[Variable range] 0 ~ +12

j Sharpness

Adjust color definition.
[Variable range] –6 ~ 0 ~ +6

Picture Adjust

Adjust the picture quality.
F Menu tree F
Parameter
Picture Adjust
a Contrast
s Brightness
d Chroma Level
f Hue
g DNR
h Enhancer
j Sharpness
[Variable range] –6 ~ 0 ~ +6

a Contrast

Adjust picture contrast.

s Brightness

Adjust picture brightness.

d Chroma Level

Adjust picture chroma level (saturation).
[Variable range] 0 ~ +12
[Variable range] –6 ~ 0 ~ +6

j Audio Delay

Compensate for mismatched timing between video and audio.
Delay audio.
This sets the delay time for audio signals.
[Variable range] 0 ms ~ 200 ms
This cannot be adjusted when playing in the EXT. IN (when in analog
mode), DIRECT or STEREO mode (with “Crossover Frequency” set
to “FIXED–THX–”, “Front” set to “Large”, “Tone Defeat” to “ON”
and “Room EQ” to “OFF”).
The adjustment range is 0 to 100 ms when the Auto Lipsync
Correction function is activated.
Operating from the main unit or the main
remote control unit
b The GUI menu is not displayed when carrying out this setting.
q Press the AUDIO DELAY button on the main unit or A. DL button on
the main remote control unit.
w Use the o p button to set.

Status

Shows information about current settings.
F Menu tree F
Information
Status
a MAIN ZONE
s ZONE2/3/4
Setup