Denon AV SURROUND PRE-AMPLIFIER, AVP-A1HDCI 1, 3, 1, 3, 2, 1, 3, 2, 2


Getting Started Connections Setup Playback Multi-Zone Information Troubleshooting Specifications
[USB]
[ALL MUSIC/
FAVORITES]
[ZONE SELECT]
[ZONE OFF]
[MENU]
[RANDOM]
[REPEAT]
[ADVANCED SETUP]
1Press [ZONE SELECT].
The currently selected multi-zone indicator lights.
2While the multi-zone indicator is light, press [ZONE SELECT] to select the zone to be operated.
The currently selected multi-zone indicator lights.
1Use the tip of a pen to press [ADVANCED SETUP].
All the multi-zone indicators light.
2Select the multi-zone to be set.
The selected multi-zone indicator lights.
q To set to “MAIN ZONE” : Press [REPEAT].
w To set to “ZONE2” : Press [RANDOM].
e To set to “ZONE3” : Press [USB].
r To set to “ZONE4” : Press [ALL MUSIC/FAVORITES].
3Use the tip of a pen to press [ADVANCED SETUP].
The multi-zone indicator turns off.
To Cancel
1Use the tip of a pen to press [ADVANCED SETUP].
The currently selected multi-zone indicator lights.
2Press [ZONE SELECT].
All the multi-zone indicators light.
3Use the tip of a pen to press [ADVANCED SETUP].
The multi-zone indicator turns off.
1While pressing [MENU], press [ADVANCED SETUP] with the tip of a pen.
The multi-zone indicator corresponding to the currently selected
remote ID flashes.
2Select the remote ID to be set.
q To set to 1 : Press [REPEAT].
The “M” indicator flashes.
w To set to 2 : Press [RANDOM].
The “Z2” indicator flashes.
e To set to 3 : Press [USB].
The “Z3” indicator flashes.
r To set to 4 : Press [ALL MUSIC/FAVORITES].
The “Z4” indicator flashes.
3While pressing [MENU], press [ADVANCED SETUP] with the tip of a pen.
The multi-zone indicator turns off.
While pressing [ZONE OFF], press [ADVANCED SETUP]
with the tip of a pen.
All the multi-zone indicators flash 4 times, then all the settings are
restored to their defaults.
NOTE
When changing a setting, be sure to set the same remote ID as the
AVP-A1HDCI’s (vpage 43).
Multi-zone indicator
Switching Zones
Use this procedure to select the zone to be operated by the sub
remote control unit.
Setting the Zone for Which the Sub
Remote Control Unit is Used (ZONE
SELECT LOCK Mode)
We recommend always using the sub remote control unit for the
same room. When this is done, the unit can be set so that the
zone does not switch when buttons are operated.
Setting the Remote ID
When using multiple DENON AV receivers in the same room,
make this setting so that no AV receiver other than the desired
one operates.
Resetting the Settings
Remote Control