

Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting Specifications

d Downmix Option

Set dynamic range for downmix playback of Dolby Digital sources.
[Selectable items] ON OFF
• Set this to “ON” if the sound from the front speakers seems
distorted.
• When not using the center speaker or surround speakers, the
playback sound is down-mixed and output from the front speakers.

f Auto Surround Mode

Make setting for memorizing surround mode setting for each
input signal type.
[Selectable items] ON OFF
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals
listed below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r Multi-channel signals other than Dolby Digital and DTS (PCM,
DSD, etc.)
• When playing in the PURE DIRECT mode, the surround mode does
not change even if the input signal is changed.

g Manual EQ

Adjust tonal quality for each speaker using graphic equalizer.

Adjust CH

Select speaker adjustment method.

[Selectable items] Each L/R All

Select the speaker and frequency band and adjust the level.
[Selectable items]

63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz

16kHz

[Variable range]

–20dB ~ 0dB ~ +6dB

Curve Copy

Copy the Room EQ’s “Audyssey Flat” correction curve.
[Selectable items] Yes No
“Curve Copy” is displayed after the auto setup procedure has been
performed.
Default
Resets the settings to the default values.
Setup