

Getting Started Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications

Multi Zone

ZONE2 or ZONE3 Pre-out Connections

If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 or ZONE3 pre-out
(variable or fixed level) connectors can be used to play a different program source in ZONE2 or ZONE3
the same time (vpage 86, 87).
To the monitor output of ZONE2, various formats of video signals input by the video conversion function
are automatically converted and output (vpage 9).
To the monitor output of ZONE3, video signals input from the S video terminal or video terminal is output
(vpage 9).
The ZONE2 (ZONE3) video out is only for ZONE2 (ZONE3).
R
L
R
L
"6%*0
3-
*/ */
7*%&0
"6%*0
R
L
R
L
"6%*0
3-
*/
"6%*0
7*%&0 7*%&0
*/
7*%&0 $0.10/&/57*%&0
: 1#13
*/
47*%&0
*/
"69
065
ZONE2
Power
amplier
Input Output
Infrared
retransmitter
Infrared
sensor Extension jack for future use.
NOTE
For the audio output, use high quality pin-plug cords so that no induction humming or noise is produced.
For instructions on installing and operating separately sold devices, refer to the respective devices’
operating instructions.
To conduct multi-zone playback, see “Multi-Zone Connections and Operations” (vpage 86, 87).
Monitor
"6%*0
*/
015*$"-
"6%*0
*/
015*$"-
Monitor Power
amplier
ZONE3

ZONE2 or ZONE4 Optical Connections

The AVP-A1HDCI is equipped with Optical output connectors for ZONE2 and ZONE4. If a bit-stream amp
is rigged-up, these zones can also be used to enjoy home theater.
AV amplier
(ZONE2)
AV amplier
(ZONE4)
Connect the monitor for ZONE2 the same as the “ZONE2 or ZONE3 Pre-out Connectors” (vSee left
column).
If the signal inputted to ZONE2 is analog, change to PCM(2-channel) signal, and output it from ZONE2
optical output connectors.
Connections