ENGLISH

Setting the on-screen display (OSD)

•Use this to turn the on-screen display (messages other than the menu screens) on or off.

1

At the System Setup Menu select “On Screen Display”.

 

2

Switch to the On Screen Display screen.

 

ENTER

3

Select “ON” or “OFF”.

 

4

Enter the setting.

ENTER

The System Setup Menu reappears.

Auto tuner preset

Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8 and E1 to 8.

NOTE:

•If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to tune in the station, then preset it using the manual “Preset memory” operation.

1

Use the CURSOR buttons to specify “Auto Tuner Presets”

from the “System Setup Menu” screen.

This completes system setup. Once these settings are made, there is no need to change them unless different AV components are connected or the speakers are repositioned.

After completing system setup

This button can be pressed at any time during the system setup process to complete the process.

1

SETUP

At the System Setup Menu, press the SYSTEM SETUP button.

SYSTEM

 

TITLE

The changed settings are entered and the on-screen display turns off.

•On-screen display signals

 

 

Signals input to the AVR-2802

On-screen display signal output

 

 

 

 

 

 

VIDEO signal input

S-video signal

VIDEO MONITOR OUT video

S-video MONITOR OUT video

 

 

jack (yellow)

input jack

signal output jack (yellow)

signal output jack

 

 

 

 

 

 

1

 

E

E

C

C

 

 

 

 

 

 

2

 

C

E

C

E

 

 

 

 

 

 

3

 

E

C

E

C

 

 

 

 

 

 

4

 

C

C

E

C

 

 

 

 

 

 

(C: Signal

E: No signal)

 

(C: On-screen signals output E: On-screen signals not output)

NOTES:

•The on-screen display signals are not output from the color difference (component) video signal MONITOR OUT jacks.

•For 4 above, the on-screen display signals are output to the VIDEO MONITOR OUT video signal output jack (yellow) if the monitor TV is not connected to the S-video MONITOR OUT video signal output jack.

2 ENTER

Press the ENTER button.

The “Auto Preset Memory” screen appears.

3

Use the CURSOR button to select “Yes”.

“Search” flashes on the screen and searching begins.

“Completed” appears once searching is completed. The display automatically switches to screen.

14